<noscript id="3ytsl"></noscript>

        <nav id="3ytsl"><code id="3ytsl"></code></nav>
        <wbr id="3ytsl"></wbr>
        1. Dome Array - Rubber Glue

          For rubber glue dome array (dome sheet), there's one layer of Rubber Glue on top of the Mayler or EMI. It has special Plastic performance and can be tightly stick on Keypad or PCBs.

          Characters of dome array:

          1. Strong applicability to the changeable climate
          2. Special Plastic performance and tightly stick on Keypad
          3. With the infiltration of static the effect of protecting the loop happened
          4. EMI printing has been adopted on current Metal Dome switch, and the priority of EMI printing lies in controlling the impedance of printing surface below 1.0, which result in effect of prevention to Hertzian waves and electrometer, in this way, the tone can be dealt with on the surface
          5. Manufacturing engineering can be more difficult compared with the exist snap dome
          Structure of dome araray
          rubber glue dome array
          Technical Parameter of Dome Array:
          Total Height: 0.28-0.45 mm
          Travel: 0.13-0.30 mm
          Scope of Force: 100-400 gf
          Tolerance of Force: ±25 gf
          Click Ratio: >30%
          Life Cycles: >1 Million Cycles
          Salt and Fog Examination: v35±2°C, 5±0.1%, 48H
          Working Temperature: -20°C-50°C
          Working Humidity: Under 100%RH
          Touch Resistance: <1 ohm
          ESD Resistance: <3 ohm
          Dimension Tolerance: ±0.05-±0.15mm
          rubber glue dome array
          欧美群交